Tubs Filled From Overflow; Draining The Tub - Jacuzzi Energy 160 Use & Maintenance

Showerhead
Tubs filled from overflow

Draining the tub

To remove the showerhead from its support, press the ring downwards (1) and turn it
by approximately 45° (2).
For this purpose, reposition the showerhead, press the ring and turn it by approxi-
mately 45°, until it snaps upwards (closing of the seal on the flexible hose).
3
1
45°
2
The tub can be filled from the drain pipe through the overflow.
Turn either the knob on the taps (A-A1) or of the knob on the drain pipe (C) to open or
close the drainage column plug.
C
9
A1
5
2
A