ACP RC Quick Start Manual page 4

Quick Start Guide
Refer to Owner's Manual for Safety Statements. Complete Owner's Manual available online.
DO NOT power spray
DO NOT power spray
Access and Modify User Options
There are several options you can change to customize the operation of the oven.
Options are shown below. The factory setting is shown in bold type.
1. Press MENU )☰( keypad.
Note: If PIN Code is enabled, your unique 4 digit pin code will be required.
2. Press number "4" keypad to access "User Options".
3. To scroll between pages of settings: Press UP/DOWN )▲▼( keypads.
4. To access available options for a setting: Press corresponding number keypad.
5. To change a setting: Press corresponding number keypad.
6. To save changes: START/OK keypad.
7. To exit: Press STOP/RESET keypad.
STANDARD DEFAULT PER MODEL ( FACTORY SETTINGS IN BOLD )
Factory setting may vary by model
SETTING DISPLAYED OPTIONS
End of Cycle Beep 3 Seconds
Continuous
Burst
Speaker Volume Off
Low
Medium
High
Key Beep Off
On
Reset on Door Open End Cook Cycle
Pause Cook Cycle
Digit Entry
Single Digit
Double Digit
Folders
Maximum Cook Time 10 minutes
60 minutes
Keypad Enable Window 15 seconds
30 seconds
1 minute
2 minutes
Off
On-the-Fly Programming
On
Clean Filter Reminder Off
Every 7 Days
Every 30 Days
Every 90 Days
Off
PIN Code
On
Set PIN Code
Language Chinese )Mandarin(, Danish, Dutch, English, Filipino, French, German, Greek, Italian, Japanese, Korean, Norwegian, Polish,
Portuguese, Romanian, Russian, Spanish, Swedish, Ukrainian, Vietnamese
On
Quantity Prompt**
Off
** Available on select models only. )Only displayed in User Options menu if factory option is enabled(
©2020 ACP, Inc.
Cedar Rapids, IA 52404
No metal pans
No metal pans
DESCRIPTION
3 second continuous beep.
Continuous beep until door is opened.
5 beep bursts until door is open.
Sets volume to off.
Sets volume to low.
Sets volume to medium.
Sets volume to high.
Prevents beep when keypad is pressed.
Allows beep when keypad is pressed.
Cancels heating time count down after door is opened during cycle.
Allows oven to resume heating time countdown after door is opened during cycle.
Allows 10 )0-9( preprogrammed recipes.
Allows 100 )00-99( preprogrammed recipes.
Allows 10 folders )0-9(, each with 10 preprogrammed recipes.
Allows 10 minutes of heating time.
Allows 60 minutes of heating time.
15 seconds after oven door is opened, keyboard disabled.
30 seconds after oven door is opened, keyboard disabled.
1 minute after oven door is opened, keyboard disabled.
2 minutes after oven door is opened, keyboard disabled.
Disables pushing any additional keypads during a cook cycle.
Allows pushing additional keypads to add or change time in the middle of a cook cycle.
Oven will not display "Clean Filter Message".
Oven will display "Clean Filter Message" every 7 days.
Oven will display "Clean Filter Message" every 30 days.
Oven will display "Clean Filter Message" every 90 days.
PIN Code not required to access Menu or User Options.
PIN Code required to access Menu and User Options.
PIN Code required. Create new 4 digit PIN Code.
Prompts the user for portion quantity multiplier )1-9( upon selecting a preset recipe.
Allows user to cook individual portions, and/or use X2 Quantity multiplier feature.
For full product documentation visit:
www.acpsolutions.com
Refer to Owner's Manual for complete care and
cleaning instructions.
Do NOT use abrasive cleaners or cleaners
containing ammonia, citrus, phosphates,
chlorine, sodium or potassium hydroxide (lye).
Use of unapproved cleaning agents will void
the terms of the warranty.
CLEAN FILTER REMINDER
This oven displays "Clean Filter Reminder" at user
defined intervals. When the message displays,
ACP recommends cleaning the air filter thoroughly.
Refer to Owner's Manual for complete cleaning
instructions.
Cleaning the air filter will not shut off the message.
The message will automatically stop displaying
after 24 hours. To clear the message, Press
START/OK keypad.
Air filters and vents must be cleaned regularly to
prevent overheating of oven. Depending on oven
use and environmental conditions, the filter may
need to be cleaned more frequently. Once the
frequency is determined, set the user option for the
appropriate time frame.
Page 4 of 4
‫نمم‬ ‫الصفحةم‬
4
Part No. 20001409
Original Instructions