Ready To Start - PrimeVOLT PV-5000T-U Installation & Operation Manual

6.6 Ready to Start

Checklist

Before starting the inverter, please check the following items:
Item
Mounting
AC
RS485
RJ45
Ripple Control
Receiver
Front Cover
DC
Changing Grid Connection and Operation Parameters

If you need to change grid connection settings and/or operation parameters
including voltages, frequency range, power factor and power limitation, please
contact your local authorized service provider for an "USB key" to do so.
Check Points

Inverter is firmly mounted on
bracket(s)

The 2 lock caps are secured

Locks are closed

All cables are firmly fixed on
terminal block

Polarities are matched

Protective Ground is available

Cable gland is tightened firmly

All terminals are secured

Polarities are matched

Wires are tightened by cable
gland

If not used, sealing plugs are in
position

Front cover is firmly attached

All screws are secured

All plugs are firmly connected

Polarities are matched

Strings are not mixed wired (for
multiple MPPT models)
30
Checked?