Using Usb - PrimeVOLT PV-5000T-U Installation & Operation Manual

7.7 Using USB

Plugging in USB Stick

To acquire inverter data, you can plug in a pre-formatted USB stick into the
USB interface beneath inverter. The stick must be FAT or FAT32 formatted.
Remove the cap and plug in a USB stick. If
inverter recognizes the device, the USB
icon on LCD screen will light up.
Downloading Inverter Data

After plugging in the USB, all data stored in the
inverter will be downloaded to the stick automatically.
During the download, USB icon will be blinking.
After downloading, while USB icon stays solid, you can
then safely unplug the stick. The inverter data has been
saved in the USB stick.
Data Format
There will be two data files downloaded. One is for SQLite;
the other is a CSV (Common Separation Value).
Note on Firmware Upgrade
If the USB stick contains an update of firmware, the inverter
will not download data into USB stick but perform firmware
upgrade instead.
46