Ready To Start - PrimeVOLT PV T U Series Installation & Operation Manual

6.6 Ready to Start

Checklist

Before starting the inverter, please check the following items:
Item
Mounting
AC Wiring
RS485
RJ45
Ripple Control
Receiver
Front Cover
DC Wiring
 Changing Grid Connection and Operation Parameters
If you need to change grid connection settings and/or operation parameters
including voltages, frequency range, power factor and power limitation, please
contact your local authorized service provider for a "Parameter AP setting program"
with corresponding manual to execute the relating parameters adjustment.
Check Points

Inverter is firmly mounted on
bracket(s)

All cables are firmly fixed on
terminal block

Polarities are matched

Protective Ground is available

Cable gland is tightened firmly

All terminals are secured

Polarities are matched

Wires are tightened by cable gland

If not used, sealing plugs must be
plugged in the terminal properly
for protection.

Front cover is firmly attached

All screws are secured

All plugs are firmly connected

Polarities are matched

Strings are not mixed wired (for
multiple MPPT models)
33
Checked?