Epson Stylus Photo R310 Quick Reference

The example below demonstrates how to print an index of photos and then a Borderless photo on 10 × 15 cm EPSON Premium Glossy Photo
Paper.
For more detailed information, refer to the Standalone Operation Guide.

Printing an Index

Print an index of photos.
1. Insert the memory card containing your photos into the
appropriate memory card slot.
2. Load 10 × 15 cm size Premium Glossy Photo Paper into
the sheet feeder.
3. Make sure that Basic Mode is selected (the Basic Mode
light is flashing).
Basic Advanced Custom Direct Save
Stop
OK
Back
Power
Print
If Advanced Mode is selected, press the Basic/Advanced
mode switch button, then press the OK button to select
Basic Mode.
Note:
When Basic Mode is selected, the Paper Type, Paper Size
and Layout settings are automatically set to Premium
×
Glossy Photo Paper, 10 15 cm and Borderless.
When Index is selected, Layout is automatically set to
index.
4. Make sure Select Photo is highlighted, then press the OK
button to open the menu.
Press the u button to highlight Index, then press the OK
button.
5. Make sure that 1 each is indicated as the Copies setting.
6. Press the x Print button to print the Index.
7. Look at the index and choose the photo you want to
print.
The photo number will be entered as the Select Photo
setting in the following procedure.
photo number
Notes
Notes contain important information and useful tips
on the operation of your printer.

Printing a Photo

Print a photo selected from the index.
1. Press the u button to highlight Select Photo, then press
the OK button.
2. Press the u button to specify the photo number that you
have selected from the index, then press the OK button.
3. Make sure that 1 each is indicated as the Copies setting.
4. Press the x Print button to print the photo.
Copyright© 2003 by Seiko Epson Corporation, Nagano, Japan.
Printed in XXXX