Taktomat RTX Series Original Operating Instructions page 27

Mechanical installation
The switching range of the output flange is shown in the figure below. Correspondingly, the figure shows the
switching range of the cam, which corresponds to the milled off area of the cam.
Example: Rotary indexer, 4 stations (90°), switching time 0.8 s, switching angle 300°, cogging range 60°
Output flange
Fig. 11 Switching range
Version 1.0.0
Operating instructions
Cogging range
Rotary indexer RTX
90°
Switching range
300°
Page 27 of 35