Taktomat RTX Series Original Operating Instructions page 25

Mechanical installation
5.3.2 Installation
Staff Protective equipment
Qualified staff
The surface on which the partly completed machinery is to be installed must be level.

 Clean the installation surface and apply a film of oil.
 Place the rotary indexer RTX on the installation surface.
 Secure the rotary indexer RTX with screws and studs according to requirements.
 Compare the power supply with the details on the nameplate.
 Connect the drive.
The housing of the rotary indexer RTX has to be earthed consistently according to the

VDE regulations with adequate width.
Accessories on the star wheel / output flange
Observe the following constraints when attaching accessories to the star wheel / output flange:
 Maximum weight moved (as per TAKTOMAT project planning).
 Minimum positioning time (as per TAKTOMAT project planning).
 Maximum overhang (tipping moment) (as per TAKTOMAT project planning).
 Maximum tightening torque for securing holes, see torque table.
Version 1.0.0
Operating instructions
Rotary indexer RTX
Page 25 of 35