CREE LIGHTING Noctura Series Installation Instructions

When using electrical equipment, basic safety precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. DANGER- Risk of shock- Disconnect power before installation.
DANGER – Risque de choc – Couper l'alimentation avant l'installation.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
TO INSTALL:
1
NTA (11L)
Remove the (4) Screws

INSTALLATION

STEP 1:

Remove the (4) Phillips head screws on the back of the luminaire and discard screws. See Figure 1.

STEP 2:

Locate the bird spike frame on the back of the luminaire, aligning the screws included with the bird spike accessory with the holes in luminaire. Tighten
screws to 20 in-lbs (2.2 N·m)
© 2019 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content
is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree
registered trademarks of Cree, Inc.
1 of 1

IMPORTANT SAFEGUARDS

NTA (19L)
Remove the (4) Screws
and the Cree logo are
®
Noctura Series
LED Area Lights
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
NTA (35L)
Remove the (4) Screws
www.creelighting.com
LPN00636X0001A0_B
Bird Spikes