Advertisement
Step #3: Foam Tape
Item
Qty
Description
14
(4)
foam tape
Step #4: Second Gripper Sub-assembly
Item
Qty
Description
4
(2)
Gripper link
5
(2)
#4 x 1" spacer
6
(1)
Gripper plate
7
(2)
4-40 x 1.25" pan head screw
8
(2)
4-40 hex nut
14
(4)
foam tape
Copyright © Parallax Inc.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Fig #6
Gripper Kit (#28202)
•
Cut four pieces of foam tape, each 2 inches long.
•
Apply foam tape to the Gripper plate as shown in
Fig #7.
This completes the left-side Gripper sub-assembly.
•
Repeat Steps #1 through #3 to build the right-side
Gripper sub-assembly in a similar fashion.
•
Be sure the angled portions of the links match with the
Grippers face to face. Position the pieces exactly as
they appear in Fig #8.
•
Double check your work, then proceed to Step #5.
Fig #8
Fig #7
v4.0 9/16/2014 Page 3 of 13
Advertisement
