Table of Contents
Related Manuals for HELI CQDH13
Summary of Contents for HELI CQDH13
- Page 1 Operation and Maintenance manual CQDH13,14-850 Electric Reach Stacker Warning！ Please read this manual before using. Warning！ Operator should have skillful ability to use this truck and compliance safety rules. Ningbo Lida Logistics Equipment Co.,Ltd.
-
Page 2: Table Of Contents
Contents 1. General introduction..........................4 1.1 Using scope............................4 1.2 Vehicle components........................5 1.2.1 Handle operation......................... 5 1.2.2 Key switch ........................... 6 1.2.3 Battery discharge indicator....................6 1.2.4 Emergency parking......................6 1.3 Standard configuration of technical data .................. 7 1.3.1 Performance Data....................... 7 1.3.2 Dimensions Data.........................7 1.3.3 Weights.......................... - Page 3 4.4.2 Inversion braking.......................13 4.4.3 Regenerative braking....................... 13 4.5 Parking vehicles safely.......................13 5. Maintenance and repair........................13 5.1 Operation safety and environmental protection ..............13 5.2 Safety regulation for maintenance ...................14 5.2.1 Service person........................14 5.2.2 Lifting and jacking equipment ..................14 5.2.3 Clean operation ........................14 5.2.4 Operation to the electrical system .................14 5.2.5 Regulation parameters ....................15...
-
Page 4: General Introduction
1. General introduction 1.1 Using scope The reach stacker is permitted only in accordance with this instruction manual. The reach stacker described in this manual is a walking reach truck with self-propelled control, with the function of controlling the height lifting,mast reach,forks tilting,side shift by electric operation. -
Page 5: Vehicle Components
1.2 Vehicle components Serial number Name Serial number Name Operating handle Drive wheel assembly Cover plate Mast frame BlockEmergency button Frame Battery discharge indicator Load bearing wheel assembly Key switch Backrest Hood Pallet fork 1.2.1 Handle operation Serial Name Function number Emergency Protect driver function switch... -
Page 6: Key Switch
1.2.2 Key switch Screw the key to the "ON" position, turn on the vehicle power. Screw the key to the "OFF" position, turn off the vehicle power. In case of vehicle failure, please turn the key switch to the "OFF" position and drag the vehicle to a safe place before maintenance. -
Page 7: Standard Configuration Of Technical Data
1.3 Standard configuration of technical data 1.3.1 Performance Data Description CQDH13/14-850 Rated capacity 1300/1400 Travel speed,with/without load km/h 3.5/4 Lift speed,with/without load mm/s 130/150 Lowering speed,with/without load mm/s 100/180 Max.gradeability,with/without load 1.3.2 Dimensions Data Description CQDH13/14-850 Load centre distance with standard fork length C（mm）... -
Page 9: Weights
1.3.3 Weights Description CQDH13/14-850 Truck weight (with battery) 2296 Battery weight 1.3.4 Battery Description CQDH13/14-850 Battery type Acid Batteries Voltage/capacity V/Ah 24/345 1.3.5 Tyres Description CQDH13/14-850 Wheel type Wheel quantity 1/0/4 Drive wheel/Balance wheel/load wheels Wheel size, drive wheel Φ248X75 Wheel size, load wheels (2x) Φ126X75... -
Page 10: Battery - Recharging,Replacement
Charge the battery. 3. Battery - Recharging,Replacement 3.1 Safety Regulations for Handling Acid Batteries 3.1.1 Fire protection Do not smoke and avoid naked flames when handling batteries. Wherever an industrial truck is parked for charging there shall be no inflammable material or lubricants capable of creating sparks within 2 metres around the truck. -
Page 11: Battery Removal And Installation
Disconnect the cable with the battery and charge Connect the cable with the battery and the truck 3.4 Battery Removal and Installation In case changing another battery, it has to be same weight like the original battery, the weight of battery is very important to the stability and brake performance of the pallet truck. -
Page 12: Driving
appropriate signs to prevent other people from using it; When the vehicle is in emergency situations such as steering failure and automatic walking,the driver needs to quickly press the emergency brake switch button to cut off the main power of the vehicle. The electromagnetic brake can quickly hold the brake, the motor can cut off the power source, and the vehicle can quickly stop Protect the driver's safety;... -
Page 13: Inversion Braking
Release the operating handle and the handle will automatically move to the upper braking area (B). The pallet truck will brake until stop. 4.4.2 Inversion braking The truck brakes regeneratively when rotating the travelling switch ,until it starts to move in the opposite direction. -
Page 14: Safety Regulation For Maintenance
5.2 Safety regulation for maintenance 5.2.1 Service person Vehicle maintenance and repair can only be carried out by the company's professional technicians. The company's service department has a team of technicians in charge of service. They have been specially trained to be competent in various maintenance operations of the equipment. We suggest that users sign a maintenance contract with our service point. -
Page 15: Regulation Parameters
5.2.5 Regulation parameters Maintenance and replacement of hydraulic, electrical and electronic components must be careful to comply with the vehicle - related parameters. 5.2.6 Vehicle tire The quality of tires directly affects the stability and driving performance of the equipment. If it is necessary to replace the tires, the original spare parts provided by our company must be used. -
Page 16: Maintenance Checklist
5.3.1 Maintenance checklist Time interval Maintenance listings The hydraulic system Check the hydraulic cylinder, piston for damage noise or leakage ● Inspect hydraulic connectors and hose for damage and ● leakage Check the hydraulic level and refill if necessary ● Refill with hydraulic oil (12 months or 1500 working hours) ●... -
Page 17: Lubrication Maintenance
33 Check the clearance of the electromagnetic brake ● 34 Check the emergency braking function ● 35 Check the reverse braking and regenerative braking ● functions 36 Check belly switch function ● 37 Check steering function ● 38 Check lever switch function ●... - Page 18 Pull out the key switch to prevent the vehicle from being started accidentally. If it is necessary to operate under a rising vehicle, effective measures must be taken to prevent accidents such as roll over or sliding. Replace drive wheel Drive wheels can only be replaced by authorized maintenance person.
-
Page 19: Disuse And Storage
Reusing again After cleaning or maintenance, the following operations must be performed before the vehicle can be reused. Check the function of the alarm. Check the function of emergency stop switch. Check the function of the brake. ... - Page 20 performance of protective devices in accordance with current technical regulations and vehicle inspection standards. A comprehensive inspection must be carried out specifically for the safety and technical performance of the vehicle in the event of an accident. In addition, the vehicle must be thoroughly checked for any damage caused by improper use.
Need help?
Do you have a question about the CQDH13 and is the answer not in the manual?
Questions and answers