Table of Contents
Advertisement
3. MANUAL CONFIGURATION
The DiSEqC™ menus can be used to configure the DiSEqC™ settings
when an existing Freesat system is expanded to include multiple satellite
dishes. These follow a similar confirmation sequence to that described in
the Wizard setup.
To enter the DiSEqC™ setup screen press the Main Menu key on the
remote & then select: Settings/Tuning/DiSEqC™
It is essential that the Freesat dish (28.2 E) is configured correctly
otherwise normal operation of Freesat services will be affected.
3.1 TUNING of NON-FREESAT CHANNELS
Tuning of services on non-Freesat satellites is carried out as follows
Enter the Manual Tune screen by pressing the Main Menu key on the
remote & then select: Settings/Tuning
The following screen will be displayed:
8
Advertisement
Table of Contents
