Table of Contents Important information 3 - 4 Version and Application Areas Hardware Composition Assembly on the sash 8 - 15 Drilling and milling on the sash Drilling and milling for hook drive Drilling and milling jig for HS handle Roller assembly Packer assembly Drive assembly...
Important information Target group This documentation is intended exclusively for specialist companies and certified specialists. The work described may only be carried out by specialist personnel. Instructions for use and safety Assemble all hardware parts professionally as described in this manual and observe all safety instructions. Overloading or improper operation of the lift and slide hardware may cause the sash to jump out of its guide, fall out and cause serious injury. If overloading of the lift and slide hardware is expected under special circumstances, such as in Schools, Kindergartens etc., this must be prevented using the appropriate measures,...
Page 4
Keep the runner of the roller track, the threshold and all folds free of deposits and dirt, and in particular of cement or plaster residues. Avoid direct moisture on the hardware and contact of the hardware with acidic cleaning agents. Attach the operating label in a clearly visible manner to the built-in lift and slide sash. The operating label can be found in the base carton. Do not make any constructive changes to the hardware parts. If you are not sure, please ask your MACO contact person for advice. Certification The MACO hardware mentioned in the assembly instructions are tested and regularly monitored in standardised tests in accordance with EN 13126. The achieved standards Class H3 does not refer to the individual element system. Due to a wide range of influencing factors, individual element systems may experience minor deviations from standardised testing, such as: •...
lift & slide element Sash height Sash width RAB Frame outer width RAH Frame outer height Total length Handle height Backset drive Optional { } Dimensions for roller track flat Dimensions in [mm]: All dimensions without a unit definition are given in mm WINDOWS · DOORS · SLIDING DOORS...
Version and Application Areas Scheme A Schema A DIN left DIN right DIN links DIN rechts Scheme C Schema C Scheme G-A Schema G-A Scheme K Schema K Scheme A Scheme C Schema A Schema C Application Areas For MACO HS 300 the application areas as per the following table apply. For the handling of the profile, the maximum areas of application and maximum weights apply, as per the specifications of the profile manufacturer and these must be adhered to. Area Item Unit Roller track high...
Hardware Composition Pos. Item Name HS Handle Set Lift drive locks DM 37.5 PZ Connecting rod with holes HS 16.4 x 4 Front roller HS with brush 300 kg silver Rear roller HS with brush 300 kg silver Basic profile for slider 10 x 22 mm gap silver HS-KU Slide shoe 16.4 mm with cap Packer for HS-KU roller 26.5 mm height Silver drive-side Rubber buffer HS silver Lock Packer for. HS-KU locking bolts Thickness = 0.5 + 1 mm silver Rod guide roller track high silver Countersunk self-tapping screw B 4.8 x 80 Countersunk self-tapping screw B 4.8 x 65 Countersunk self-tapping screw B 4.8 x 45...
Assembly on the sash Drilling and milling for hook drive Size 1 Gr. 1 Size 1 Gr. 1 1089 1081 Size 2-3 Size 2-3 Gr. 2-3 Gr. 2-3 Gr. 4 1687 Gr. 4 1679 Size 4 Size 4 Size 5 Gr. 5 1219 Size 5 Gr. 5 1211 2119 2111 WINDOWS ·...
Assembly on the sash and frame Locking bolt Scheme A № 363159 Ø4,2 Gr. 1 Size 1 Gr. 2 Size 2 1107 Size 3 Gr. 3 1192 1507 Size 3.5 Gr. 3,5 1192 1707 Gr. 4 Size 4 1192 1907 Gr. 5 Size 5 1192 2307 WINDOWS ·...
Assembly on the sash and frame Locking bolt Scheme C № 363159 Ø4,2 Gr. 1 Size 1 Schema C Scheme C Size 2 Gr. 2 1107 Size 3 Gr. 3 1192 1507 Size 3.5 Gr. 3,5 1192 1707 Gr. 4 1192 1907 Size 4 Gr. 5 1192 2307 Size 5...
Assembly on the sash and frame Hook striker plate Scheme A Schema A Scheme C Schema C Gr. 1 Size 1 Size 2-3 Gr. 2-3 1030 Gr. 4 1628 Size 4 Gr. 5 1160 2060 Size 5 WINDOWS · DOORS · SLIDING DOORS...
Horizontal section 88 Scheme C WINDOWS · DOORS · SLIDING DOORS...
Page 24
MACO RAIL-SYSTEMS MAYER & CO BESCHLÄGE GMBH Alpenstraße 173 Created: 01/2018 - Changed: 06.03.2020 A-5020 Salzburg Order No. 758562EN All rights reserved and subject to change. Tel.: +43 662 6196-0 This print document is revised regularly. The latest version is available at E-Mail: maco@maco.eu https://www.maco.eu/assets/758562en www.maco.eu...