Related Manuals for Maco A-TS Series
Summary of Contents for Maco A-TS Series
- Page 1 TECHNOLOGY IN MOTION www.maco.eu ASSEMBLY INSTRUCTIONS A-TS Automatic door lock timber For use only by certified specialists! M119317 PROTECT DOOR LOCKS...
-
Page 2: Table Of Contents
Table of Contents Item Page Important Information Use of transportation protection devices Instructions for use 7 - 11 Installation instructions 12 - 20 Set lock for day release function (assembler) Day release element assembly on the lock (assembler) MACO day release opener assembly on the striker plate (assembler) Day Release operating instructions (end-customer) Positions 4 mm air gap, 9/10 mm offset Positions 4 mm air gap, 13 mm offset... - Page 3 Table of Contents Item Page Positioning of the striker plates 29 - 38 2 Multi-function latches with hooks Low K+605, 4 mm air gap, 9/10 mm offset Standard K+730, 4 mm air gap, 9/10 mm offset H igh K+980, 4 mm air gap, 9/10 mm offset Low K+605, 12 mm air gap, 9/10 mm offset Standard K+730, 12 mm air gap, 9/10 mm offset High K+980, 12 mm air gap, 9/10 mm offset Standard K+730, 1-fsash, 12 mm air gap, 13 mm offset Standard K+730, 2- sash, 12 mm air gap, 13 mm offset High K+980, 1-sash, 12 mm air gap, 13 mm offset High K+980, 2- sash, 12 mm air gap, 13 mm offset Lengthening/shortening of the A-TS K+730 39 - 40 Module without additional locking points Module with additional locking points openDoor Access Control Solutions 41 - 52 Overview...
- Page 4 Important Target This documentation is intended exclusively for specialist companies and certified specialists. The work-steps described here in may only be carried out by certified specialists. Instructions for use • Unless otherwise indicated, measurements are made in millimetres. • Assemble all hardware parts professionally as described in these instructions and observe all safety instructions. • All diagrams are only symbolic. • With the spacer-block setting, observe the technical guideline No. 3 of the glazier trade "Blocking of glazing units". • Observe the "Guidelines and Instructions for Product and Liability (GIPL)". • Inform the end-user about the contents of the "Guidelines and Instructions for End Users (GIEU)".
-
Page 5: Important Information
Backset Distance Handle height Profile front edge Multi-function latch End lock Sash rebate height Case dimension top Case dimension bottom Important Information WINDOWS · DOORS · SLIDING DOORS... -
Page 6: Use Of Transportation Protection Devices
Use of transportation protection devices Simple transport protection devices, wedges or blocks ensure a safe transport of the entire door element. Total door elements. Remove only after installation. Transport protection device position WINDOWS · DOORS · SLIDING DOORS... -
Page 7: Instructions For Use
Instructions for use Never open the lock case! Remove swarf from the milled space! Drill all holes before installation of the lock! Do not force the handle pin through the lock nut! WINDOWS · DOORS · SLIDING DOORS... - Page 8 Instructions for use Only close the lock with the corresponding Do not use force during the cylinder assembly! operating key! Do not turn the key using force! Do not simultaneously press the key and handle! The latch of the main lock must not rub against the striker plate –...
- Page 9 Instructions for use Only apply load to the handle in the normal The multi-point lock must be replaced as soon direction! Apply a maximum force of 15 kg in as traces of use of force are visible! the direction of actuation (on the handle)! Two-sash doors must not be forced over the in- Do not close the lock latch when the door is active leaf!
- Page 10 Instructions for use Do not carry the door leaf with the handle! Do not paint or varnish over the padlock bolt or latch! WINDOWS · DOORS · SLIDING DOORS 10 10...
- Page 11 Instructions for use The door lock (lock case) is delivered with an intensive lubrication of high-performance greases and must NOT be re-greased! Lubricate the MF-HO locking element 1x annually! Do not use lubricating oil, rust remover, silicon spray etc! Lubricate only with grease or technical Vaseline! Grease the latch and deadbolt 1x annually! * Spray grease (455341), ** Rust remover WINDOWS ·...
-
Page 12: Installation Instructions
Installation Instructions a = faceplate c = latch d = latch insert e = insert leg of latch insert Crank Multi-function latch Release the screw and push forward using the screwdriver! Remove the latch! Turn the latch over and place it on the faceplate (a) so you can press the insert leg (e) of the latch insert (d) under the... -
Page 13: Set Lock For Day Release Function (Assembler)
Installation Instructions Set lock for day release function (assembler) Set day release function Manufacturer delivery state Lock Lock Remove the day release screw Insert the day release screw (2.5 mm hex socket) (2.5 mm hex socket) Unlock Unlock When the day release is pre-set, the main latch is not operated on motorised operation (door does not automatically spring open)! WINDOWS ·... -
Page 14: Day Release Element Assembly On The Lock (Assembler)
Installation Instructions Day release element assembly on the lock (assembler) Remove the faceplate cover. Position the day release element on the back of the faceplate (directly on the latch above the lock case) and push onto the lock case. Screw on the day release element with the attached TX20 M4x10 screw on the front of the faceplate! WINDOWS ·... -
Page 15: Maco Day Release Opener Assembly On The Striker Plate (Assembler)
Installation Instructions MACO day release opener assembly on the striker plate (assembler) Demount the latch element. Mount the MACO day release opener. Activate the mechanical unlocking using the lever on the day release opener*. * The mechanical unlocking can remain active as the day release is controlled via the day release actuator on the lock (see “Day Release” operating instructions p.16). WINDOWS ·... -
Page 16: Day Release Operating Instructions (End-Customer)
Installation Instructions Day Release operating instructions (end-customer) Activate day release Deactivate day release Press the handle so that the locking Press the handle so that the locking element and the multi-function latch are element and the multi-function latch are pulled in! pulled in! Push the day release actuator upwards, Push the day release actuator... -
Page 17: Positions 4 Mm Air Gap, 9/10 Mm Offset
Installation instructions Positions 4 mm air gap, 9/10 mm offset Position of latch and deadbolt Position of striker plate and striker plate multi-function latch with hook Pressure adjustment: +/- 2 mm with latches and deadbolt striker plate +/- 1.5 mm with MF-HO striker plate Positioning of notch faceplate = notch striker plate A rebate clearance of 2-6 mm must be adhered to in the installed state! WINDOWS ·... -
Page 18: Positions 4 Mm Air Gap, 13 Mm Offset
Installation instructions Positions 4 mm air gap, 13 mm offset Position of latch and deadbolt Position of striker plate and striker plate multi-function latch with hook Pressure adjustment: +/- 2 mm with latches and deadbolt striker plate +/- 1.5 mm with MF-HO striker plate Positioning of notch faceplate = notch striker plate A rebate clearance of 2-6 mm must be adhered to in the installed state! WINDOWS ·... -
Page 19: Positions 12 Mm Air Gap, 9/10 Mm Offset
Installation instructions Positions 12 mm air gap, 9/10 mm offset Position of latch and deadbolt Position of striker plate and striker plate multi-function latch with hook Pressure adjustment: +/- 2 mm with latch and deadbolt striker plate +/- 1 mm with MF-HO striker plate Positioning of notch faceplate = notch striker plate A rebate clearance of 10-14 mm must be adhered to in the installed state! WINDOWS ·... -
Page 20: Positions 12 Mm Air Gap, 13 Mm Offset
Installation instructions Positions 12 mm air gap, 13 mm offset Position of latch and deadbolt Position of striker plate and striker plate multi-function latch with hook Pressure adjustment: +/- 2 mm with latch and shootbolt striker plate +/- 1.5 mm with MF-HO striker plate Positioning of notch faceplate = notch striker plate A rebate clearance of 10-14 mm must be adhered in the installed state! WINDOWS ·... -
Page 21: Door Constructions
Door constructions 4L 9V 4L 9V 4L 10V 4L 10V Timber 4 mm air gap SKALIERT auf 35% (Info fü 4 mm air gap, 9 mm offset 4 mm air gap, 10 mm offset 4L 10V 4L 13V 12L 9V A rebate clearance of 2 – 6 mm must be adhered in the installed state! 4 mm air gap, 13 mm offset WINDOWS ·... -
Page 22: Timber 12 Mm Air Gap
SKALIERT auf 35% (Info für Zeichner) SKALIERT auf 35% (Info für Zeichner) Door constructions L 13V 12L 9V 12L 9V 12L 10V 12L 10V Timber 12 mm air gap eichner) 12 mm air gap, 9 mm offset 12 mm air gap, 10 mm offset 12L 10V 12L 13V A rebate clearance of 10-14 mm must be adhered in the installed state! 12 mm air gap, 13 mm offset... -
Page 23: Drilling And Routing Patterns Multi-Function Hook Striker Plate
Drilling and routing patterns Lock case and multi-function latch with hook locking ≤2 42,5 ≤2 15,5 15,5 Comfort Ö ner (Motor) Notch faceplate 17,5 Vorschlag Kabelposition für Zutrittskontrolle 16,2 +0,2 - 0, 12,2 +0,2 - 0,2 Lock case Recommended cable position for access control WINDOWS ·... -
Page 24: Latches And Deadbolt Striker Plate 9/10 Mm Offset
SKALIERT auf 30% (Info für Zeichner) SKALIERT auf 30% (Info für Zeichner) Drilling and routing patterns Latches and deadbolt striker plate 9/10 mm offset Timber 4 mm air gap Timber 12 mm air gap 4L 9V-10V 4L 9V-10V 12L 9V-10V 12L 9V-10V X=GM X=GM X=GM X=GM WINDOWS · DOORS ·... -
Page 25: Multi-Function Hook Striker Plate 9/10 Mm Offset
SKALIERT auf 30% (Info für Zeichner) SKALIERT auf 30% (Info für Zeichner) Drilling and routing patterns Multi-function hook striker plate 9/10 mm offset Timber 4 mm air gap Timber 12 mm air gap 2 MF-HO 4L 9V-10V 2 MF-HO 12L 9V-10V 4L 9V-10V 12L 9V-10V +726 +726 -764 -764... -
Page 26: Latches And Deadbolt Striker Plate 13 Mm Offset
Drilling and routing patterns Latches and deadbolt striker plate 13 mm offset, 4 mm air gap * routing pattern E-openers WINDOWS · DOORS · SLIDING DOORS... - Page 27 Drilling and routing patterns Latches and deadbolt striker plate 13 mm offset, 12 mm air gap * routing pattern E-openers WINDOWS · DOORS · SLIDING DOORS...
-
Page 28: Multi-Function Hook Striker Plate 13 Mm Offset
Drilling and routing patterns Multi-function hook striker plate 13 mm offset Timber 4 mm air gap Timber 12 mm air gap Winkelschliessblech Winkelschliessblech Winkelschliessblech Winkelschliessblech 13 V 13 V 13 V 13 V 12 L 12 L 2 MF-HO 2 MF-HO +726 +726 -764 -764 11,5 11,5 WINDOWS ·... - Page 29 Positioning of striker plates 2 Multi-function latches with hooks, Low K+605 4 mm air gap, 9/10 mm offset * Use cover faceplate for higher SRH! Motor for motorised opening WINDOWS · DOORS · SLIDING DOORS...
-
Page 30: Standard K+730, 4 Mm Air Gap, 9/10 Mm Offset
Positioning of striker plates 2 Multi-function latches with hooks, Standard K+730 4 mm air gap, 9/10 mm offset Motor für Comfortöffnung * Use cover faceplate for higher SRH! Motor for motorised opening WINDOWS · DOORS · SLIDING DOORS... -
Page 31: H Igh K+980, 4 Mm Air Gap, 9/10 Mm Offset
Positioning of striker plates 2 Multi-function latches with hooks, High K+980 4 mm air gap, 9/10 mm offset Motor für Comfortöffnung * Use cover faceplate for higher SRH! Motor for motorised opening WINDOWS · DOORS · SLIDING DOORS... -
Page 32: Low K+605, 12 Mm Air Gap, 9/10 Mm Offset
Positioning of striker plates 2 Multi-function latches with hooks, Low K+605 12 mm air gap, 9/10 mm offset * Use cover faceplate for higher SRH! Motor for motorised opening WINDOWS · DOORS · SLIDING DOORS 32 32... -
Page 33: Standard K+730, 12 Mm Air Gap, 9/10 Mm Offset
Positioning of striker plates 2 Multi-function latches with hooks, Standard K+730 12 mm air gap, 9/10 mm offset Motor für Comfortöffnung * Use cover faceplate for higher SRH! Motor for motorised opening WINDOWS · DOORS · SLIDING DOORS... -
Page 34: High K+980, 12 Mm Air Gap, 9/10 Mm Offset
Positioning of striker plates 2 Multi-function latches with hooks, High K+980 12 mm air gap, 9/10 mm offset Motor für Comfortöffnung * Use cover faceplate for higher SRH! Motor for motorised opening WINDOWS · DOORS · SLIDING DOORS... -
Page 35: Standard K+730, 1-Fsash, 12 Mm Air Gap, 13 Mm Offset
Positioning of striker plates 2 Multi-function latches with hooks, Standard K+730, 1-sash 12 mm air gap, 13 mm offset Single striker plate Lock Single piece door striker Motor für Comfortöffnung Motor für Comfortöffnung *für höhere FFH Abdeckstulpe verwenden! *für höhere FFH Abdeckstulpe verwenden! * Use cover faceplate for higher SRH! **Ansteckende für Anpassung an Bodenschwelle **Ansteckende für Anpassung an Bodenschwelle Motor for motorised opening... -
Page 36: Standard K+730, 2- Sash, 12 Mm Air Gap, 13 Mm Offset
Positioning of striker plates 2 Multi-function latches with hooks, Standard K+730, 2-sash 12 mm air gap, 13 mm offset French casement drive gear Lock Finger operated door shootbolt Motor für Comfortöffnung * Use cover faceplate for higher SRH! *für höhere FFH Abdeckstulpe verwenden! Motor for motorised opening **Ansteckende für Anpassung an Bodenschwelle ***für höhere FFH Art. -
Page 37: High K+980, 1-Sash, 12 Mm Air Gap, 13 Mm Offset
Positioning of striker plates 2 Multi-function latches with hooks, High K+980, 1-sash 12 mm air gap, 13 mm offset Single striker plate Lock Single piece door striker Motor für Comfortöffnung Motor für Comfortöffnung * Use cover faceplate for higher SRH! *für höhere FFH Abdeckstulpe verwenden! *für höhere FFH Abdeckstulpe verwenden! Motor for motorised opening **Ansteckende für Anpassung an Bodenschwelle **Ansteckende für Anpassung an Bodenschwelle ***für höhere FFH Art. -
Page 38: Positioning Of The Striker Plates
Positioning of the striker plates 2 Multi-function latches with hooks, High K+980, 2-sash 12 mm air gap, 13 mm offset French casement drive gear Lock Finger operated door shootbolt Motor für Comfortöffnung * Use cover faceplate for higher SRH! *für höhere FFH Abdeckstulpe verwenden! Motor for motorised opening **Ansteckende für Anpassung an Bodenschwelle ***für höhere FFH Art. -
Page 39: Lengthening/Shortening Of The A-Ts K+730
Lengthening/shortening of the A-TS K+730 Module without additional locking point Only possible with A-TS K+730 module! When using the lengthening or shortening faceplate, the standard eurogroove must be used! FFH 2150 – FFH 2650 Shortening faceplate pack Contents: 1 pc. fixing bolt FFH 1900 –... -
Page 40: Module With Additional Locking Points
Extension of the A-TS K+730 Module with additional locking point Only possible with A-TS K+730 module! When using the A-TS intermediate faceplate module, the standard eurogroove must be used! FFH 2250 – FFH 3100 The A-TS intermediate FFH 1900 – faceplate module is delive- FFH 2400 red with two pre-inserted fi-... -
Page 41: Opendoor Access Control Solutions
openDoor Access Solutions Overview 3-latch door lock with opening motor High security thanks to self-locking of steel hooks and locking latch Tamper-proof Control unit protected from unauthorised access Maximum comfort thanks to motorised release Plug & Play Simple, non-mistakable plug-in connection EASY mounting and de-mounting of the... -
Page 42: A-Ts Transponder Plus
openDoor Access Solutions A-TS Transponder Plus Plug & Play connector / ca- Motor cable connection Power supply 12 - 24 V DC ble installation min. 1.5 A Tension release Motor to access solution connection Brown: motor operating Access solution: voltage minus - Transponder Plus White: motor operating voltage plus +... -
Page 43: A-Ts Transponder Keypad And Touchkey
openDoor Access Solutions A-TS Transponder Keypad and Touchkey Plug & Play connector / ca- Motor cable connection Power supply 12 - 24 V DC ble installation min. 1.5 A Motor to access solution connection Tension release Brown: motor operating Access solutions Touchkey/ voltage minus - Keypad... -
Page 44: Somfy Lock Controller
openDoor Access Solutions Somfy lock controller Tension release Motor cable connection Power supply 12 - 24 V DC min. 1.5 A DIP switch DIP switch 4 ON = IN1 / IN 2 Locking monitoring ON OFF = IN1 / IN 2 Locking monitoring OFF DIP switch 5 ON = 3 sec. exit activation 1/2 OFF = 1 sec. exit activation 1/2 Plug &... -
Page 45: Circuit Diagram Frame-Side
openDoor Access Solutions circuit diagram frame side 12 - 24V DC Plug & Play connector / min. 1.5 A cable installation Brown: motor operating voltage Transformer minus - Brown - White: motor operating voltage plus + White + Green: control voltage* minus - Yellow Control voltage * plus + Access solutions: Touchkey... -
Page 46: Circuit Diagram Button Impulse
openDoor Access Solutions circuit diagram button impulse Plug & Play connector / cable installation 12 - 24V DC min. 1.5 A Brown: motor operating voltage minus - White: motor operating voltage plus + Transformer Green: control voltage* minus - Brown - Yellow Control voltage * plus + White + * The control voltage is required for push-button (button impulse) and toggle switch (activation/... -
Page 47: Circuit Diagram Toggle Switch
openDoor Access Solutions circuit diagram toggle switch Plug & Play connector / cable installation 12 - 24V DC min. 1.5 A Brown: motor operating voltage minus - White: motor operating voltage plus + Transformer Green: control voltage* minus - Brown - Yellow Control voltage * plus + White + * The control voltage is required for push-button (button impulse) and toggle switch (activation/... -
Page 48: Routing Pattern Transponder Plus
openDoor Access Control Solutions Routing pattern Transponder Plus WINDOWS · DOORS · SLIDING DOORS... -
Page 49: Routing Pattern Keypad / Touchkey Bt
openDoor Access Control Solutions Routing pattern Keypad / Touchkey BT 39,5 39,5 WINDOWS · DOORS · SLIDING DOORS... -
Page 50: Routing Pattern Including Assembly Of Connector Plate And Motor
openDoor Access Control Solutions Routing pattern including assembly of connector plate and motor ≤ 20** 15,5 16,2 +0,2 - 0,1 12,2 +0,2 - 0,2 * Control unit for openDoor access control solutions, ** Cable channel for comfort solution, *** Cable for openDoor access control solutions WINDOWS ·... -
Page 51: Cable Transition For Opening Angle ≤110°, Timber 12 Air
openDoor Access Control Solutions Cable transition for opening angle ≤110°, Timber 12 Air R8 at F-16 R10 at F-20 3 mm depth R8 at F-16 R10 at F-20 3 mm depth WINDOWS · DOORS · SLIDING DOORS 51 51... -
Page 52: Cable Transition For Opening Angle ≤ 180°, Timber 4 Air, 12 Air
openDoor Access Control Solutions Cable transition for opening angle ≤ 180°, Timber 4 Air, 12 Air R8 at F-16 R10 at F-20 30 mm depth 1 mm depth 3 mm depth Due to the different hinge variations and the resulting drive shafts, the position of the cable tray (dimension X) and the cover plate (dimension Y) must be manually calculated! WINDOWS ·... - Page 53 Notes WINDOWS · DOORS · SLIDING DOORS 53 53...
- Page 54 Notes WINDOWS · DOORS · SLIDING DOORS 54 54...
- Page 55 Notes WINDOWS · DOORS · SLIDING DOORS 55 55...
- Page 56 MACO PROTECT Satisfied? MAYER & CO We appreciate your BESCHLÄGE GMBH feedback@maco.eu Alpenstraße 173 Created: 01/2019 - Changed: 21.04.2020 A-5020 Salzburg Order No. 757784 All rights reserved and subject to change. Tel.: +43 662 6196-0 This print document is revised regularly. The latest version is available at E-Mail: maco@maco.eu https://www.maco.eu/assets/757784...