Rtc Adjustment - Sony IPELA SNC-CS11 Service Manual

2-4. RTC Adjustment

1. Connection
Connect each equipment referring to the connection
diagram in Section 2-1-2.
2. Setting of camera
(1) Turn on the power of each equipment.
(2) Start a Web browser using PC and type the camera IP
address (192.168.0.100) in an address column.
Address (D)
The welcome page of a network is displayed.
(3) Click the [Setting] button.
The Setting window is displayed.
SNC-CS10/CS11
3. Adjustment
1. Click the "Data & time" tab.
2. Place a checkmark in the checkbox of "Synchronize
with PC" of "Adjust", and then click the [OK] button.
3. Check that the contents of "Current date & time" are
the same as those of "PC clock".
n
If the contents of "Current date & time" and "PC clock"
are not the same, perform the procedure from step (1)
again.
2-11