Dishes Are Damaged During A Cycle; Error Codes - Midea MDT24H2AST User Manual

DISHES ARE DAMAGED DURING A CYCLE

PROBLEM
NOTE: Some types of
hand.
When the dishwasher fails, there will be the following prompts:
You will hear a prompt tone from the machine for a few seconds.
1.
2. The indicator light on the outer door will continue to flash "white
light-blue light" alternately.
3. The indicator lights on the operation panel will continue to flash, and
different combinations of lighting indicate different faults, refer to the
following table:
Code
E1
Rinse light
flashing.
E4
Normal light
flashing.
40
Dishes not loaded
Moving the rack
in or out of the
dishwasher too
Meanings Cause
Incorrect water Low or No
fill amount water flow, or
too much water
flow during
filling process.
Too much
leak sensor
tub or a leak.
SOLUTION
glasses so they are
stable and will not strike
together from washing
action.
Minimize chipping by
moving the rack in and
Solution
turned on to the
dishwasher. Verify
supply must
pressure between
sufficient flow.
First, turn off
dishwasher. Check
in the filter. If