Advertisement
Setup Guide – D-Link DVA-2800
2. Configure your WAN Access Type
a. Hover over 'Settings' and click on 'Internet' in the drop-down.
b. In the 'Internet' Settings, the first drop-down setting "WAN Access Type" will need to be
changed according to your connection type.
i. If your connection type is HFC (Hybrid Fibre Coaxial), FTTC (Fibre to the Curb) or
FTTP (Fibre to the Premises), make this setting:
ii. If your connection type is FTTB (Fibre to the Basement) or FTTN (Fibre to the Node),
make this setting:
Note: If you are not sure what your connection type is, you can contact our support team and
1300 467 283
"VDSL"
.
they'll be able to tell you.
support@gointernet.net.au
"Residential Gateway"
.
www.gointernet.net.au
Advertisement
