Service Mode - Sony DPP-FP95 Service Manual

3-1. SERVICE MODE

Note on the service mode screen:
The selected item on the screen displayed in the service mode is
framed by "yellow frame". In this manual, the yellow frame is
referred to as "frame".
3-1-1. STARTUP/QUITTING PROCEDURE
Note on starting the service mode:
• Do not use the mode that is not described in this manual.
• Perform the operation in each mode according to the operation
procedure in this manual.
Connection procedure:
1. Insert one power cord plug into the AC adapter (AC-S2422)
supplied with the DPP-FP95 (hereafter, referred to as this unit)
and insert the other power cord plug into the receptacle.
2. Insert the DC plug of the supplied AC adapter into the DC-IN
terminal of this unit.
DPP-FP95
Procedure:
1. Press the [ON/STANDBY] button while pressing the [ENTER]
and [CANCEL] buttons simultaneously.
2. Release all buttons when the initial screen of the service mode
is displayed.
3. Select each mode except the USB Test mode, by using the
DIRECTION buttons (f,F) (framed item) and press the
[ENTER] button.
4. Press the [CANCEL] button to return to the startup screen of
the service mode while any test mode other than the Button
Test is running.
5. Press the [ON/STANDBY] button to quit the service mode
while any test mode other than the Button Test is running.
(POWER OFF)
3-2