Basic Config - Asus WL-500b User Manual

Internet Firewall (Cont.)
Click an item on the menu to reveal a submenu.
Follow the instructions to set up the ASUS Wireless
Router. Tips are displayed when you move your
cursor over an item.

Basic Config

Enable Firewall? – Selecting "Yes"
enables firewall to apply general SPI
rules.
Logged Packet Type – This field
indicates what kind of packets
between WAN and LAN will be
logged.
Enable Web Access from WAN – This field allows you to specify the port
used to access Web server of the ASUS Wireless Router from Internet. The
default value is 8080. If you know the WAN IP address of the Wireless
Router, open your web browser and enter the IP address. For example:
http://140.113.201.1:8080
If you enable the DDNS with an account, please open your web browser
and enter the host name registered in DDNS service provider. For example:
http://wl500g.homelinux.org:8080
Note: The default web browser port 80, is reserved for the Web server
within your local network.
Port of Web Access from WAN - This field allows you to specify the port
used to access the Web server of the ASUS Wireless Router from the Internet.
The default value is 8080.
Responds LPR Request from WAN - This field allows you to decide if
you like to respond to LPR requests from Internet.
Responds Ping Request from WAN - This field allows you to decide if
you like to respond to ping requests from Internet.
Chapter 3 - Software Configuration
ASUS Wireless Router 57