- In Auto trial operation, product will automatically select either cooling or heating mode and operate in
selected mode.
- In the temperature range marked with slashed pattern, system protection control may trigger during
the auto trial operation.)
-
Auto trial operation
-
when auto trial mode is completed.)
-
-
-
- Refer to service manual if you need inspection or when other errors occur.
-
result report.
-
operation again.
- Check if cooling/heating operation performs normally.
-
-
- Check for proper draining from the indoor unit during cooling operation.
- Use S-NET pro to check the detail operation status.
Hand over the installation manual to the customer so they can keep it with them.
•
CAUTION
open, it may cause damage to the product and
you may not get the precise data from S-NET
pro.
99