Samsung AM FXVAF Series Installation Manual page 96

Setting the MCU and Pipe Addresses (for HR Only)
To run the Auto pipe pairing operation, take the following steps:
(Display : .)
Indoor temperature
Indoor temperature
hours to protect the compressor.)
-
Setting completed
Setting error
• If the MCU ports to use are set incorrectly, the Auto pipe pairing operation may stop due to high-pressure
CAUTION
• Depending on the indoor and outdoor temperatures, the Auto pipe pairing operation may stop due to
protection control.
• If an error occurs while the Auto pipe pairing operation is running, check the error code and take actions.
•
96
Main heating operation
Main heating operation
End
Indoor unit data
-
Indoor unit data
(displayed
alternately)
- If two or more indoor units have setting errors, the data
Main heating operation
Main cooling operation
Description
Main cooling operation
Main cooling operation
)