Open Source License; Installer Setting; How To Enter Installer Setting Mode - LG Therma V ZHBW056A0 Service Manual

Open Source License

View the remote controller's open source license.
• In the service setting list, select the open source license category, and press [OK] button to move to the detail
screen.

3.3 Installer setting

How to enter installer setting mode

CAUTION
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it could cause problems to the unit, user injury or property dam-
age. This must be set by an certificated installer, and any installation or change that is carried out by a non-certifi-
cated person should be responsible for the results. In this case, free service cannot be provided.
h Installer setting password
Main screen → menu → setting → service → RMC version information → SW Version
Example) SW version : 1.00.1 a
In the above case, the password is 1001.
h Remote controler should be hanged botton of control box in service
OK
- 42 -
Copyright © 2018 LG Electronics Inc. All rights reserved.
Only training and service purposes.