Table of Contents
Advertisement
Filter sign operating time (Standard/long/short/no display)
z
„
Filter sign display time interval and filter sign no display can be selected.
Fresh-air intake
z
„
INDOOR
FUNCTION SETTING
„
„
Ceiling height (standard/high ceiling)
z
„
Air conditioner operation capacity (air flow) switching is possible as response to height of
installation ceiling.
Cooling room temperature correction (Standard/low control)
z
„
Air conditioner control temperature can be switched to a little low as response to installation
conditions.
Heating room temperature correction (Standard/low/slightly high/high
z
„
control)
Air conditioning control temperature can be slightly adjusted as response to installation conditions.
Auto restart (ON/OFF)
z
„
ON/OFF of the function which automatically resets operation to the operation state before the
power interruption at power recovery when there was a power interruption during operation can be
selected.
R oomtemperaturesensingfunction(ON/OFF)←onlyatwiredremote
z
„
controller connection
Sensor which controls the room temperature can be selected in two types: "Indoor sensor only" or
"Indoor sensor or wired remote controller sensor can be switched by remote controller operation".
OUTDOOR
- (01 - 02) -
Advertisement
Chapters
Table of Contents
