1-5. Auto Restart
The following settings are also possible, depending on the operating conditions.
Setting Description
Yes
No
1-6. Indoor Room Temperature Sensor Switching Function
(Only for Wired remote controller)
The following settings are needed when use the control by Wired remote controller temperature
sensor.
Setting Description
No
Yes
If setting value is "00",
•
room temperature is controlled by the indoor unit temperature sensor.
If setting value is "01",
•
room temperature is controlled by either indoor unit temperature sensor or remote controller unit sensor.
( . . .Factory setting)
Function Number
Setting Value
40
( . . .Factory setting)
Function Number
Setting Value
42
- (01 - 26) -
00
01
00
01