Milk Circuit Only - La Cimbali M100 Use And Installation

Preset automatic washing cycle (NSF)
only for machines with Turbo Milk
Function - after each milk cycle has terminated, the timer
count-down starts (max 210'). At the end, "AUTOMATIC
WASHING" appears on the display, with the time
remaining before the wash cycle begins.
Activation - activation is automatic at the end of the
remaining 30" seconds. During this stand-by time:
• if selector (13) is turned, the count stops for 5" after this
interval the 30" count will start again
• if the milk/cappuccino dispensing button is pressed, the
timer count-down will start from the set up time (210').
• If the icon is pressed, the automatic wash cycle will
be performed immediately.
Selection block - always inactive. The wash cycle is
performed even if the user does not intervene.
Wash type - with milk or water, completely automatic.
Special conditions
1) with each milk washing cycle:
In this case, the entire circuit is washed. Therefore,
during the rst milk dispensing procedure, the circuit
is considered free of residual milk and the timer (210')
countdown is not launched.
2) each time the machine is switched off while the timer
countdown (210') is underway:
when the machine is switched on again, if 210' have
passed, once the machine reaches its operating
temperature, the preset automatic washing cycle is
launched and cannot be stopped.

Milk circuit only

Automatic wash
only for machines with Turbo Milk
Function - after each milk cycle has terminated, the
timer count-down starts (from 2 to 20 minutes). At the
end, "AUTOMATIC WASHING" appears on the display,
with the time remaining before the wash cycle begins.
Activation - activation is automatic at the end of the
remaining 30" seconds. During this stand-by time:
• if selector (13) is turned, the count stops for 5" after this
interval the 30" count will start again
• if the milk/cappuccino dispensing button is pressed, the
timer count-down will start from the set up time (2' 20').
• If the icon is pressed, the automatic wash cycle will
be performed immediately.
Selection block - always inactive. The wash cycle is
performed even if the user does not intervene.
Wash type - with water, completely automatic.
For more details, please consult the technical manual
at the "Con guration menu - wash options" paragraph.
34 EN
13