Pre-Installation Checklist - MartinLogan Statement 40XW Driver Assembly Manual

P -i C
re nstallation heCklist
NOTE: This is the second part of the Installation process .
Do not proceed until all steps in the "In-wall Back Box
Manual" have been completed .
If using the Statement On-Wall Enclosure you may pro-
ceed from Step 17 .
Required Tools:
-3/32 Hex Bit (Not Included)
-5/32 Hex Bit (Not Included)
-Power Drill
-#2 Philips Bit
-#2 Hand Screwdriver
-Medium Grit Sanding Sponge
PLEASE NOTE: INSTALLATION IS A 2 PERSON JOB .
6