Specifications - MartinLogan Statement 40XW Driver Assembly Manual

s
PeCifiCations
Frequency Response:.................................48–25,000 Hz ± 3 dB
Tweeter Dispersion (horizontal x vertical).....80° x 52-inch line source
Sensitivity.................................................95 dB @ 2.83 volts/ meter
Impedance...............................................4 ohms. Compatible with 4, 6, or 8 ohm rated amps
Crossover Frequencies..............................300, 2700 Hz
High-Frequency Drivers.............................Sixteen Folded Motion XT Obsidian Tweeters
Mid-Frequency Drivers..............................Sixteen 3.5-inch (8.9 cm) unidirectional carbon fiber
Low-Frequency Drivers..............................Eight 6.5-inch (16.5 cm) unidirectional carbon fiber
Binding Post Inputs...................................Push style (two sets for easy installation)
Crossover Components............................Custom air core coil inductors, polypropylene film capacitors,
Suitable Amplifier Range...........................50–800 watts
Max Power Handling................................400 watts
Weight................................................... 150 lb (68.1 kg)
Required Wall Cavity................................(width) Minimum: 14.5 inch (368 mm)
Required Wall Cavity................................(height, unobstructed) Minimum: 89 inch (2260 mm)
Required Wall Cavity................................(depth) Minimum: 3.5 inch (89 mm)
Enclosure (width x height x depth, excludes padding)...14.3 x 84.2 x 3.4 inch (361 x 2137 x 86mm)
Grille (height x width)............................................... 11.5 x 59.5 inch (292 x 1511 mm)
*Specifications are subject to change without notice
16
multi-section cone with Nomex® backer and cast aluminum basket, sealed
back chamber format. Concave dust cap
multi-section cone with Nomex® backer and cast aluminum basket, sealed
back chamber format. Concave dust cap
and low DF electrolytic capacitors.
Maximum: 16.5 inch (420 mm)