Advertisement
Available languages
Available languages
CUTTING LENGTH ADJUSTMENT:
If used without any guide comb attached and using the adjustment lever, the GC910 hair clipper offers the
possibility of making finishing touches with a height of 0.9 (lever up) and 2 mm (lever down) and (if used with
attachment combs) performing classic hair cuts with the following lengths: 3, 6, 9 and 12 mm.
CLEANING AND MAINTENANCE:
A clean and properly lubricated hair clipper considerably improves its capacity and cutting precision.
DO NOT CLEAN ANY PART OF THE APPLIANCE UNDER RUNNING WATER.
CLEANING THE HEAD:
Before any cleaning operation, make sure that the appliance is properly turned off and disconnected from the
power outlet. Remove the accessory if it is inserted. Using the special brush supplied, remove any hair
residues between the blades and the back of the blade head.
NEVER DISASSEMBLE THE HEAD OF THE BLADE OR YOU WILL INVALIDATE THE WARRANTY ON
THE ENTIRE PRODUCT.
HOW AND WHEN TO LUBRICATE THE BLADE:
Before the first use we recommend lubricating the blade with a drop of the oil found in the package or with
any other lubricating oil (make sure that it is not too viscous).
Turn the hair clipper upside down (Fig. 3) so that oil does not drip on the appliance. Lubricate the blade with
a few drops of oil. Turn the appliance on for a few seconds so that the oil is distributed evenly along the entire
blade. Then, using a dry cloth, eliminate any excess oil residues.
We recommend repeating this procedure every two months or more often, depending on product use.
17
Fig.3
BLADE DURATION:
The duration of the blade varies based on usage frequency and times. Although correct maintenance is
performed, if the cutting efficiency is compromised, contact the manufacturer to have the entire head
replaced.
You can find the product manuals and warnings on the site www.gamaprofessional.com.
18
Advertisement
