Safety - NetterVibration NEA Series Operating Instructions Manual

Safety

2 Safety
The NEA/NEG are intended for generating circular vibrations.
Intended use
General applications are: loosening, conveying, sorting, compacting, sepa-
rating bulk materials and reducing friction. NEA/NEG are used for empty-
ing bunkers, as drives for conveyor troughs, sieves and vibrating tables.
The NEA/NEG are designed for installation in machines and may only be
put into operation, if it has been assured that the complete machine com-
plies with the regulations of the machinery directive.
Any other use is considered improper.
Qualification Installation, commissioning, maintenance and troubleshooting of the
of qualified NEA/NEG may only be performed by authorised qualified personnel.
personnel
All handling of the NEA/NEG is the responsibility of the operator.
Accessory
parts
operation and safety, must have the appropriate degree of protection for
this specific purpose.
Liability
Netter
damages if technical changes to the product were made or the notices and
regulations in these instructions were not observed.
Safety
rules
6
All accessory parts connected to the NEA/NEG, which ensure correct
Vibration assumes no liability for personal injuries and material
Electric shock
An electric shock will result in serious injury or even death.
The NEA/NEG must be free of voltage during assembly,
start-up, maintenance and troubleshooting.
Observe the following five safety rules:
1. Disconnect the NEA/NEG from the mains supply.
2. Secure the NEA/NEG against re-activation.
3. Establish that the NEA/NEG has no voltage.
4. Earth and short-circuit the power supply of the NEA/NEG.
5. Cover adjacent live parts or fence them off.
IMPORTANT
DANGER