Table of Contents
Advertisement
Safety
Falling parts
Falling parts
The NEA/NEG or parts of the construction can come loose due to vibra-
tion. Falling parts can lead to severe personal injuries.
➢ Use only suitable fastening screws and safety washer to attach the
➢ Check the fastening screws after one hour of operation and thereafter
➢ Retighten the fastening screws, if necessary. Use a torque wrench and
➢ In critical installation situations suitable securing is mandatory.
Rotating
Unbalances
Risk of injury due to rotating unbalances
During operation of the NEA/NEG without unbalance covers there is risk of
injury due to rotating unbalances.
➢ Operate the NEA/NEG only with mounted unbalance covers.
Hot surfaces
Risk of burns due to hot surfaces
NEA/NEG can strongly heat up during operation. Direct contact may cause
burns.
➢ Do not touch the NEA/NEG or the cable near the cable gland during
➢ Only operate the vibrators within the permissible ambient temperature,
10
NEA/NEG.
Netter
For attachment
kits NBS.
regularly (generally monthly).
tighten the screws crosswise.
operation or shortly after being switched off.
according to Ch. Technical data, page 11.
WARNING
Vibration recommends using
WARNING
CAUTION
Netter
fastening
Advertisement
Table of Contents
