Table of Contents
Advertisement
Transport and storage
5
Transport and storage
Observe the safety instructions in Ch. Safety, from page 6 on.
Please refer to the brochure for weights and dimensions.
When transporting the NEA/NEG, ensure that the NEA/NEG is not sub-
Transport-
jected to strong impacts or vibrations that could damage the bearings.
conditions
Please observe the following notes:
• Use only the transport eyelet/eyelets (1) for lifting the NEA/NEG. If the
• The pulling direction must not exceed 45°.
• Lifting tools are of the usual kind such as a pulley or a crane. When
• Handle the NEA/NEG very carefully during transport.
The NEA/NEG are packed ready for installation.
Packaging
The packaging protects the NEA/NEG from transport damage. The pack-
aging material has been selected from an environmentally safe and tech-
nically disposable point of view and is therefore recyclable.
The return of packaging to the material cycle conserves raw materials and
reduces the amount of waste.
• Store the NEA/NEG in a dry and clean environment.
Storage
• The permissible storage temperature is between -15 °C and +60 °C.
• The permissible relative humidity is max. 60 %.
• The storage time is max. 2 years.
•
• Do not store the NEA/NEG outdoors. The electrical components are
14
vibrator is fitted with two transport eyes, both must be used for lifting.
moving loads, use suitable steel cables or hoisting slings which are suf-
ficiently dimensioned for these weights.
If the vibrator is operated in areas with potentially explosive dust
(zone 21 or 22) a revision at
age time of more than one year.
not protected against corrosion.
Netter
Vibration is mandatory after a stor-
Advertisement
Table of Contents
