Press Start; Changing Options; Do You Want To Load More Dishes; If The Machine Is Switched Off With - Asko D3350 Use And Care Manual

Press start

The dishwasher will now start. It manages
the entire wash automatically. Close the
door properly, or the machine will not start.

Changing options

If you want to change program after having
started the machine, press the Start/Stop
button for three seconds. Then select a new
program and press the Start/Stop button.

Do you want to load more dishes?

Open the door; the machine stops automati-
cally, put in the dishes, close the door and
the dishwasher will continue from where it
left off.

If the machine is switched off with

the main switch

(or in the event of a power cut) before the
washing program has been completed, the
interrupted program will continue when
power comes back on.
NB!
If the power is switched off, or if the door is
open for more than 2 minutes during drying,
the program is interrupted.
14
7

After dishwashing

Once the machine has finished, it is only
drawing standing current. Should you wish
to disconnect the current completely, just
switch off at the main switch. Turn off the
water tap if the machine is not to be used for
an extended period, e.g. during holidays.
Advice!
For even quicker drying, allow the door to
stand slightly ajar.