Setting Water Hardness - Asko D3350 Use And Care Manual

Setting water hardness

If you have a dishwasher with a water softener, you may need to change the setting, de-
pending on the hardness level of the water. Phone your local Water Board to check the water
hardness in your area. The dishwasher is set for low water hardness on delivery.
1. Switch off the dishwasher at the main switch.
START
2. Press the main switch while holding in the Start/Stop switch. Release the
STOP
Start/Stop button.
PROG PROG 3. Press the Program button from one to nine times depending on the hard-
ness of the water. A figure 0 (no water softener and machines with soften-
ers with low hardness), 1, 2, 3, etc. will appear in the display window.
No.
0
1
2
3
4
5
6
7
8
9
START
4. Press the Start/Stop button and the setting will be stored until next time you
STOP
want to make a change.
26
˚dH ˚fH
0-5 0-9
6-8 9-14
9-11 15-20
12-14 21-25
15-19 26-34
20-24 35-43
25-29 44-52
30-39 53-70
40-49 71-88
50+ 89+