Settings - Asko D3350 Use And Care Manual

Settings

Reprogramming
Some of the machine's functions can be reprogramd. You get into the machine's change
program using the machine's ordinary buttons as per the instructions below. The selection
will be retained until the next time you reset this function.
Even if the machine is turned off at the main switch or loses power for any other reason, all
selections registered before the interruption of power will be retained.
Child-safe lock on controls
You can prevent a child starting the machine by accident or changing the settings by pro-
gramming the machine with a button lock, which requires the High temperature and Extra
dry buttons to be pressed simultaneously to start up the machine. The button lock will
automatically be reactivated after three minutes.
1. Switch off the dishwasher with the main switch.
+ 2. Hold in the High temperature and Extra dry buttons while pressing the
main switch. The High temperature, Extra dry and Start symbols will flash.
Release the High temperature and Extra dry buttons.
3. Press the Program button until the display shows 1 with a key symbol
PROG PROG
alongside it.
START 4. Then press the Start/Stop button to store the setting.
STOP
or Reset:
1. Switch off the dishwasher with the main switch.
+ 2. Hold in the High temperature and Extra dry buttons at the same time as
pressing the main switch
3. Press the Program button until the display shows 0 and the key symbol
PROG PROG
disappears.
START 4. Then press the Start/Stop button to confirm the setting.
STOP
24