Advertisement
3. Operating TZT2BB
3.1. Basic User Interface
TZT2BB can be operated in the consistent GUI with the TZTL12F/15F.
The appearance on the screen and multi touch operational flows are
identical among the TZTL12F/15F and TZT2BB.
3.2. Operating with MCU-005
The MCU-005 is a new control unit for NavNet TZtouch2 MFDs. It consists of full keys that can operate the TZT2BB
without using multi touch. The following illustration and table shows the keyboard component and available functions of
the MCU-005 keyboard.
No
Key
1
Power status
The LED shows the status of MCU-005 power.
2
SCROLLING
Chart, Radar, and Fish Finder screens are scrolled.
3
SHIP/3D
Short press: The screen goes back to the vessel position, i.e. Center Vessel, Center Radar, Cancel
History.
Long press: The chart screen goes into the 3D mode.
4
RANGE
Chart, Radar, and Fish Finder ranges are adjusted.
5
RotoKey™
Chart, Radar, and Fish Finder ranges are adjusted by rotating the knob.
Menu items can be selected by rotating and pushing the knob.
6
STBY/AUTO
Short press: The AUTO mode of NAVpilot-700/300 is activated.
Long press: The AUTO mode of NAVpilot-700/300 is deactivated (STBY).
Descriptions
8
Advertisement
