Advertisement
Limited Functions and Notes
Although most operations are available only with a mouse/trackball and wheel, take the following limitations and notes.
(1) Limitation in 3D Mode – Pan/Tilt
You can turn the screen mode into the 3D mode by selecting [3D Mode]
from the context. However, you CANNOT pan/tilt the chart with a
mouse/trackball because sliding the screen with two fingers is the only
way to pan/tilt it. The chart in 3D is always in the default angle as shown at
right. Or if you have paned/tilted the chart with two fingers before, the
screen will be in the previously-set angle. This is the only inaccessible
function with a mouse/trackball.
(2) Note on Cursor Operation and Touch Operation
While a cursor is in motion, touch operations are not available. When you switch to the touch operation, ensure to stop
the mouse/trackball cursor operation.
11
Advertisement
