Advertisement
1. TZT2BB
The TZT2BB is a New Black Box for NavNet TZtouch2 series, which offers
versatile operational and installation options with unique features. This
document highlights advanced features, basic specifications, and
installation of the TZT2BB.
1.1. Powerful Dual Processors for Dual Monitors with Independent Resolutions
The TZT2BB consists of dual processors in one box for powerful performance and the ability to support independent
resolutions on dual monitors. In the TZT2BB configuration with dual monitors, each monitor shows independent
images, and you can operate each monitor independently and simultaneously. This is a big advancement from
the Extended Mode of the NavNet 3D MFDBB. The following table briefly summarizes the difference in image output
among TZT2BB, TZTBB, and MFDBB. See
TZT2BB (NavNet TZtouch2)
Dual outputs in different resolutions are
supported.
1.2. Multi Touch Operation in Consistent GUI with TZTL12F/15F
The TZT2BB supports multi touch operation over multi touch monitors connected via HDMI (for images) and USB (for
touch) cables. The intuitive GUI on the screen is consistent with the TZTL12F/15F. See
Section 4.1
and
4.2
for multi touch monitor requirements and tested monitors.
1.3. MCU-005 for Full Keyboard Operation
The MCU-005 is a new, full keyboard with multiple keys. When monitors are located away from the main helm or not
compatible with multi touch, the MCU-005 fully supports the operation of the TZT2BB.
Note:
(1) The TZTL12F/15F are also compatible with the MCU-005 with the version 6.21 and later.
(2) See
Section 3.2
and
Section 4.3
TZTBB (NavNet TZtouch)
Only the Clone mode is supported for
dual outputs. The same image in the
same resolution is output.
5.4
for details of MCU-005.
for details of TZT2BB screen resolutions.
MFDBB (NavNet 3D)
Different
images
in
resolution
are
output
processor in the Extended mode.
Section 3.1
for basic GUI and
the
same
from
the
3
Advertisement
