Advertisement
SPECIFICATIONS:
Frequency Response:
Dynamic Range:
THD:
CMRR:
Equivalent Input Noise:
Maximum Input Level:
Maximum Output Level:
Input Connections:
Output Connection:
Maximum Gain:
Input Gain Switch:
XLR Input Impedance:
High Pass Filter:
Output Phase:
Output Limiter Type:
Phantom Power:
Signal Metering:
Tube Type:
Chassis Type:
Power Requirements:
Dimensions:
Weight:
Therefore, specifications are subject to change without notice.
10Hz –40kHz (+0, -1dB)
>100dB (20Hz to 20kHz)
<0.05% (typical)
>60dB (typical)
-130dB (XLR to XLR 'A' weighted)
+16dBu (XLR)
+17dBu (1/4")
+26dBu (XLR)
+20dBu (1/4")
¼" unbalanced (1meg Ohm),
XLR balanced
¼" unbalanced (600 Ohm),
XLR balanced (<300 Ohm)
70dB (XLR to XLR)
50dB (1/4" to XLR)
20dB
4.7k Ohms / 600 Ohms, Switch selectable
-3dB @ 40Hz, Switch selectable
Normal / Invert, Switch selectable
Fast FET limiter, >20dB range, (+6dBu XLR, 0dBu ¼")
+48V DC, Filtered, Current limited
Precise LED array, Fast attack, Musical release
30dB range,
12AX7A hand selected
All Aluminum black anodized with integral rubber sides
10Volts AC @ 700ma (typical)
1.75"H x 5.9"W x 6.5"D (44.5mm x 150mm x 165mm)
2.5 lbs. (1.14 kg)
Note: 0dBu = 0.775Vrms
ART maintains a policy of constant product improvement.
-15dB, -7dB, 0dB, Clip(+15dB)
10
Advertisement
