Table of Contents
Advertisement
4.5 Inspecting
Inspect all product components after each cleaning and disin-
fection. Replace any broken, misshapen or seriously dis-
coloured parts.
4.6 Storage
Store this product as described below:
• Wind the power cord up
loosely.
NOTE! Do not wind the power
cord around the compressor. If
the power cord is wound or
bent very tightly, the wires in-
side the cord may break. The
power cord will then be
unusable.
• Wrap all individual components in a clean, lint-free cloth
(e.g., a tea towel).
• Store this product in a dry, dust-free place.
Unplug the power plug from the socket when putting the
compressor away. Electrical devices that remain plugged
into the power supply present a potential hazard source.
– 31 –
Advertisement
Table of Contents
