Mac Filter - D-Link DWR-961 User Manual

Section 3 - Configuration
This page allows you to create a list of clients that will be able or unable to connect to your Wi-Fi network. Clients are filtered based on their MAC
addresses.

MAC Filter

Set this to Allow or Deny to either disallow or accept
MAC Address
Filter Mode connections by default. Set this to Disable to disable the MAC
address filter.
Add Click this to add a new MAC address to the filter list.
OK Click this to confirm the addition.
Delete All Click this to delete all MAC addresses from the filter list.
D-Link DWR-961 User Manual
MAC Filter
34