Ipv6 Wan Setting - D-Link DWR-961 User Manual

Section 3 - Configuration
On this page you can configure your router's IPv6 WAN connection by changing the connection type and specifying which interface to use.
WAN Interface Setup
Enable IPv6 Check this to enable or disable IPv6.
Select either DHCPv6 or Static.
Origin Type
WAN Link Select the WAN interface to use for the IPv6 connection.
Type
Stateless Select this to enable stateless address autoconfiguration.
Address Auto
Configuration
Stateful Select this to enable stateful address autoconfiguration.
Address Auto
Configuration
DUID Indicates the DHCP unique identifier.
PD Enable Check this to enable prefix delegation.
Rapid- Check this to enable rapid two-message configuration with the
commit
client.
Enable
D-Link DWR-961 User Manual

IPv6 WAN Setting

23