The Control Unit - boho office EASYDESK LINE Aassembly Instructions

The control unit (DPG)
How to use the memory function
To save a memory position, first move the table to the desired position. Press and hold
the "star" key for 2 seconds. The light strip starts flashing white. The position has been
saved when it is permanently lit.
To move the table to a memory position, press and hold the panel.
If the DPG offers the automatic procedure, briefly press the DPG twice in the direction
in which you want to move the table. The DPG stops at the first stored position in the
selected direction.
How to save up to 4 memory positions and reset the memory
The DPG with display can store up to 4 memory positions.
Move the table to the required height and press the "star" key until the display shows
either "star 3" or "star 4". Release the key again.
To save a position, press the "star" key and hold it down for 2 seconds. The light strip
starts flashing white. The position has been saved when it is permanently lit.
To reset all memory positions, press the "star" key and hold it for 8 seconds until the
light strip flashes red.
8