Checking The Contents; Fixing The Crossbeam - boho office EASYDESK LINE Aassembly Instructions

Checking the contents

Have all parts for the desk ready, including the desktop

Fixing the crossbeam

Extend the crossbeam to the desired length
(width from 1.150 to 1.750 mm) extensionable in 50 mm steps
The crossbeam must not be pulled completely apart in order not to pull the drive
shaft apart.
The minimum setting at the connection end is 100 mm (to keep the power supply
and the RJ45 sockets accessible), otherwise adjustable in steps of 50 mm.
3