Lenovo V14 and V15 Hardware Maintenance Manual
1070 Fan assembly and Heat Sink assembly
For access, remove the FRU in following order:
•
•
Step 1: Release the cables from the cable guides in the direction shown by
arrows 1.
When installing: Route the antenna cables along the cable guides. As you
route the cables, make sure that they are not subjected to any tension. Tension
could cause the cables to be damaged by the cable guides, or a wire to be
broken.
"1010 Base cover" on page 41
"1020 Battery pack" on page 43
Figure 16. Release the cables
1
1
51