1060 Pci Express Mini Card For Wireless Lan - Lenovo V14 Hardware Maintainence Manual

Lenovo V14 and V15 Hardware Maintenance Manual

1060 PCI Express Mini Card for wireless LAN

For access, remove the FRU in following order:
•
•
Step 1: Remove the screw 1.
Step 2: Disconnect the two wireless LAN cables (black, gray) 2.
Unplug the jacks by using the removal tool antenna RF connector
(P/N: 08K7159), or pick up the connectors with your fingers and gently
unplug them in the direction shown by the arrows.
Notes: The wireless LAN card has 2 cables in step 2.
"1010 Base cover" on page 41
"1020 Battery pack" on page 43
Important:
The preinstalled WLAN module may only be replaced with a Lenovo approved
module in order to comply with FCC and IC regulations. Refer to Table 4 "Parts
list—Overall" on page 35 for Lenovo part numbers for the approved modules.
Figure 14. Remove the screw and disconnect the wireless LAN cables
The wireless LAN card in some models might have 3 cables in step 2.
Step Screw (quantity)
M2 × 3 mm, Phillips-head, nylok-coated (1)
1
1
2
2
Color Torque
Silver 1.85+/-0.15 kgf/
cm
49