1070 Fan And Heat Sink Assembly - Lenovo ideapad 330S-14IKB Hardware Maintenance Manual

Lenovo ideapad 330S-14IKB/Lenovo ideapad 330S-14IKB U/
Lenovo ideapad 330S-14IKB D/Lenovo ideapad 330S-15IKB/
Lenovo ideapad 330S-15IKB U/Lenovo ideapad 330S-15IKB D
Hardware Maintenance Manual

1070 Fan and heat sink assembly

For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
Figure 7. Removal steps of fan and heat sink assembly
Unplug the connector in the direction shown by arrow 1. Remove the screws
2 and loosen the screws 3. Release the cable from the cable guides.
Lenovo ideapad 330S-14IKB
Lenovo ideapad 330S-15IKB
Step
2
When installing: Make sure that the connector is attached firmly.
40
Screw (quantity)
M2.0 × 3.0 mm, Phillips head, nylok-coated (2)
Fan
Color Torque
Black
1.0~1.5 kgf*cm