Important Information About Replacing Rohs Compliant Fru - Lenovo V14 Hardware Maintainence Manual

Important information about replacing RoHS compliant FRU

RoHS, The Restriction of Hazardous Substances in Electrical and
Electronic Equipment Directive (2002/95/EC) is a European Union legal
requirement affecting the global electronics industry. RoHS requirements
must be implemented on Lenovo products placed on the market after
June 2006. Products on the market before June 2006 are not required to
have RoHS compliant parts. If the original FRU parts are non-compliant,
replacement parts can also be non-compliant. In all cases if the original
FRU parts are RoHS compliant, the replacement part must also be RoHS
compliant.
Note: RoHS and non-RoHS FRU part numbers with the same fit and function
are identified with unique FRU part numbers.
Lenovo plans to transit to RoHS compliance well before the implementation
date and expects its suppliers to be ready to support Lenovo's requirements
and schedule in the EU. Products sold in 2005 and 2006 will contain some
RoHS compliant FRU. The following statement pertains to these products and
any product Lenovo produces containing RoHS compliant FRU.
RoHS compliant FRU have unique FRU part numbers. Before or after the
RoHS implementation date, failed RoHS compliant parts must always be
replaced with RoHS compliant ones, so only the FRU identified as compliant in
the system HMM or direct substitutions for those FRU may be used.
Non-RoHS
Non-RoHS
Non-RoHS
RoHS
Note: A direct substitution is a part with a different FRU part number that is
automatically shipped by the distribution center at the time of the order.
Products marketed before June 2006
Current or Replacement FRU Current or
original part
Can be Non-RoHS
Can be RoHS
Can sub to RoHS
Must be RoHS
Important service information
Products marketed after June 2006
Replacement FRU
original part
Must be RoHS Must be RoHS
17