Pairing Additional Controller - Seeley MaglQtouch Installation And Owner's Manual

COMMISSIONING
Step 5
When the Wireless wall controller is paired the installation wizard will appear.
The Installation wizard will step you through the complete process.
To complete the commissioning please refer to the 'MagIQtouch Controller -
Installation manual supplied with this kit.
PAIRING ADDITIONAL WIRELESS CONTROLLER
The wireless receiver can communicate with 2x Wireless Smart Controllers
within the system. During normal operation whichever wall controller is used
last will take control of the system.
To pair an additional Wireless Smart Controller commence with the following
steps.
Step 1
Fit the 4x AA batteries supplied with the Wireless Smart controller.
13 |
ILL1610-B
NOTE:
Rechargeable
batteries should not
be used.
Only good quality
Alkaline or Lithium
AA batteries to be
used.
ILL2856-A