Commissioning; Connecting The Receiver; Pairing - Seeley MaglQtouch Installation And Owner's Manual

COMMISSIONING

• Factors that may influence performance are:
• Shielding from metal in the attic laying between the wireless receiver and
the wireless smart controller.
• Reflections from metal around the wireless receiver.
• Interference from nearby transmitters (e.g. mobile phone, AM radio,
Television, RF security systems)
CONNECTING THE WIRELESS RECEIVER
Please refer to the installation manual of the heating or cooling appliances
for connecting the 6 pin communication plug from the wireless receiver.
Some manuals may refer to a 'wired' wall control configuration. However, the
wireless receiver can be connected in place of the wall control connection
shown in the schematic diagrams.

PAIRING

Step 1
Fit the 4x AA batteries supplied with the Wireless Smart controller.
Step 2
Cycle the power to the installation.
11 |
NOTE:
Rechargeable
batteries should not
be used.
Only good quality
Alkaline or Lithium
AA batteries to be
used.
ILL2856-A