Notes; General Remark; Limitation Of Liability; Manufacturer - ADS-tec IRF1000 Series Instruction Manual

IRF1000 series Instruction manual v1.3 4

1 Notes

1.1 General remark

This instruction manual is intended to ensure safe and efficient handling of the
industrial router and firewall of type IRF14x1, referred to in the following as "device".
The instruction manual must be read carefully by personnel before commencing any type of work.
All of the safety instructions and handling instructions given in the manual must be obeyed in order to
ensure that work is carried out safely.
Operation of the device is subject to the laws and regulations which are applicable in the respective
country at national, federal, European and international level.
The generally accepted rules of technology, usually in the form of standards, directives, regulations,
conditions and technical rules specified by national and federal organisations as well as trade
associations and committees for the field of specialisation concerned, shall apply.
Figures used in this instruction manual are provided for basic understanding and may differ from the
actual design.
The operator/operating company is independently responsible for compliance with and observance of
any subsequently introduced technical innovations or new legal requirements, as well as for all usual
obligations of the operator/operating company.
The original version of this instruction manual was written in German. All non-German versions of this
instruction manual are translations of the German instruction manual.

1.2 Limitation of liability

ads-tec Industrial IT GmbH shall not be liable for personal injury, property damage or damage caused to
the device as well as consequential damage that is/was the result of non-compliance with this
instruction manual, improper use of the device, repairs and other actions on the device by unqualified
electricians and electricians not certified by ads-tec Industrial IT GmbH, or that is/was the result of using
unapproved replacement parts. Failure to observe the maintenance intervals shall also result in
exclusion from liability. Furthermore, it is strictly forbidden to make any unauthorised alterations or
technical modifications to the device.

1.3 Manufacturer

The manufacturer of the product is ads-tec Industrial IT GmbH. The company is referred to in the
following as ADS-TEC.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany